How to Make a Bath Mat out of T-shirts

pink and green high-pile bath mat closeup with text overlay: how to make a bath mat out of upcycled t-shirts

This DIY bath mat is a fun project that can be colorful and lively, or more muted depending on what fits your mood and dΓ©cor. I love the raggedy high-pile look and feel of this mat, and I’ll show you how I made it in case you’d like to follow along and make your own.

pink and green high-pile bath mat closeup with text overlay: how to make a bath mat out of upcycled t-shirts

I used 6 t-shirts to make this bath mat. You probably already have some worn-out t-shirts on hand, or you can stop by the thrift store to get some in whatever colors you like. I only used shirts that were made primarily of cotton, so that the mat would be very absorbent. (Some athletic wear is made of synthetic fibers, which I chose to avoid.)

I like upcyling where I can, (check out some of my other upcycled projects!) but I understand that you may not be able to find t-shirts in the exact colors you are looking for. In that case, you can use cotton jersey knit yardage like this. It’s perfectly fine to use a print! The pattern won’t really show up in the finished mat, but the colors will.

The amount of fabric you will need depends on how large you want to make your mat, but 2 yards would have been plenty to make my bath mat, which was 30″ wide by 18″ tall at the tallest point. So unless you want to make a large rug, 2 yards is a good amount to purchase.

We will also be using some sturdy woven fabric as the bottom layer that all of the t-shirt strips will be sewn to. Don’t be afraid to upcycle here, too! A tablecloth from the thrift store would work just fine, or any fabric that doesn’t stretch and isn’t too flimsy. Aim for a fabric that’s a little thicker than a bed sheet, but thinner than denim. Get something that goes with the colors of t-shirts or knit fabric you chose. One yard of 44″ wide fabric was plenty to make my bath mat, but if you want a rug that’s quite large you may want to buy more than that.

I added some dots of clear 100% silicone caulk to the back of the mat, as an anti-skid treatment. I recommend buying a squeeze tube like this, because I think it’s much easier to control than a caulking gun. I let the caulk cure completely before putting it on my floor, and it hasn’t harmed my floor in any way. It works very well to keep the mat from sliding around. You may want to try it on any other area rugs in your house that always seem to shift around.

You will also need basic sewing supplies (here is a list of my favorites) – I’m using a rotary cutter and mat to cut the shirts, which makes the process very fast and easy, but you can use scissors if that’s what you have! This really is a no-sweat project, because nobody will be able to tell if the strips weren’t cut perfectly evenly.

I also recommend a size 14 or 16 sharp sewing machine needle.

cutting t-shirts into strips to make a bath mat

I cut my t-shirts into 1″ (2.5 cm) strips from one side to the other. I cut around the hems and sleeves, as well as any writing that was on the shirts, so that I just had plain strips of cloth.

pulling t-shirt strips to make them roll up into tubes
cutting the side seams off of t-shirt strips

Then I pulled on the ends of the strips of cloth until they rolled into little fabric tubes, and snipped out the small pieces of the t-shirt side seams that were left.

Every now and then you’ll come across a t-shirt that doesn’t turn into a tube when you cut it and tug on the strip. I decided to only use shirts that rolled into tubes, but of course that’s up to you.

colored t-shirt strips in a pile

If you are using a large piece of jersey knit, you will need to make sure that you cut your strips so that they roll into tubes when you pull on them. Cut a strip off the side of the piece of fabric and stretch it. If it doesn’t roll into a tube, then cut strips off of the top or bottom instead of the side.

sheets of newspaper taped together

The best thing about making your own bath mat is that you get to decide not only the colors, but how large you want your mat and what shape you’d like it to be. I suggest taking some newspaper over to your shower and laying it on the floor to visualize exactly how big you want your bath mat to be, and what shape suits you best. Tape some pieces of newspaper together if you want a larger mat.

cutting folded newspaper

Fold the newspaper in half and trim both sides at once so that it stays symmetrical, and cut it down to different sizes and shapes. Lay out your options on your bathroom floor until you find one you’re happy with.

newspaper cut into a template to make a bath mat

I kept going back to a shape that was kind of a rectangle with a semicircle stuck onto it. Lol… but that’s what fit in the space and looked good, and the semicircle part will catch any drips of water as the shower door swings open.

Once you’re happy with the size and shape of the newspaper template, you’re ready to cut out your base fabric. Fold the piece of woven base fabric in half, and lay your newspaper template flat on top. You want to cut out 2 pieces of base fabric using your newspaper as a guide, and since the fabric is folded, this way you’ll cut both pieces out at once.

base fabric to make a bath mat

Put the two pieces of base fabric right sides together, and sew around the edges, leaving a space about 4″ (10 cm) long unsewn so you can turn it right-side out. Clip the excess fabric out of the seam allowances if you have any curved edges. The above picture shows my base fabric after I’ve sewn and clipped it, but before I turned it right-side out.

Now turn the mat right-side out, and fold in the seam allowances on the opening where you just turned it right-side out. Glue the seam allowances with a glue stick, so that it looks like the edge of the mat is sewn all the way around. The glue stick is temporary, but we will be sewing over the seam allowances and closing the opening permanently as we start adding the t-shirts to the mat.

sewing the first row of t-shirt strips onto base fabric

Mark lines on the top of your base fabric to help guide you in sewing down the t-shirt pieces. (If you picked a striped or plaid base fabric, you can just follow the lines of the fabric.) My lines were 1/2″ (1.25 cm) apart. Now lay t-shirt tubes on the first line like I have in the pictures, and sew all the way down the mat. I used a walking foot, and I recommend using one if you have it, but if you don’t, no worries. Just use what you’ve got and go slowly.

First row of t-shirt strips sewn down to the base fabric

Once you get the first line sewn, the mat kind of looks like a grass skirt. Now is the time to wrap it around your waist and dance around the house to Bang the Drum All Day. You might be thinking, can’t I skip this step? The answer is no. No, you cannot.

I chose not to trim the t-shirt pieces after I sewed each row, I just made a 2″ loop and went on to the next row. I thought the strips would be easier to keep a handle on that way. But if you want to cut the excess off and start each row by laying the t-shirt pieces out, do what works best for you.

randomizing the colors in the bath mat

I also didn’t want stripes in the finished mat, like I would have if I always sewed a light pink, then a dark green, then a light green, etc. on every row. So I switched it up by crossing some of the strips over each other to randomize the colors a little bit. Take a look at the picture above to see what I mean.

adding a new t-shirt strip to the bath mat

When one strip got too short to use for another row, I just stuck a new one in its place and kept going. Make sure that you sew over the opening in the base fabric (the hole where you turned the large piece of fabric right-side out) as you sew on the lines of t-shirt strips.

When I was all done, I cut through all of the loops at the top so that the bath mat was just covered in shaggy noodles, not loops. You can leave the loops, but loops tend to grab your toes when you step on the mat.

I also added some dots of clear 100% silicone caulk to the back of the mat, to keep it from sliding around on my bathroom floor. (I recommend buying a squeeze tube like this, because I think it’s much easier to control than a caulking gun.) I let the caulk cure completely before putting the mat on my floor, and it works very well to keep the mat in place. The caulk hasn’t harmed my floor in any way, although I guess there might be some floors that don’t get along with cured silicone caulk. I’m not a flooring expert. 😦

applying anti-skid rug treatment

If you want to, you can get creative and make designs with the caulk. The clear caulk obviously won’t show up very well, but you can also get the squeeze tubes in white, if you want the caulk to be visible on the back of your mat. I machine-wash the mat all the time, and it’s held up super well. The caulk is still firmly in place.

How to make a t-shirt bath mat

And there you have it! An upcycled bath mat that’s comfortable and absorbent, in colors that match your bathroom! Woohoo!

About SnazzyBot

I am an artist and fashion designer with a passion for helping people bring their own creative dreams to life. I love sharing my projects with fellow crafters, and I hope you find ideas and inspiration on my blog! As an Amazon affiliate, I earn a small commission (at no extra cost to you) if you use my affiliate links to make a purchase.

19 Responses

  1. Susan

    Just curious to know if your base fabric is just a regular piece of cotton cloth or if it is a knit type of fabric. I found this page at Sew Can She.


  2. vivoaks

    Just found you today because of your bath mat pattern. Thanks so much for such an easy solution to an on-going problem. Dirt tracked through the house makes the bath mat look horrible, and trying to wash it every week means I don’t have one for awhile….Now it doesn’t matter!! I can make as many as I’d like!!! And they’re sew cute!!! Love your creativity!!!

    Liked by 1 person

  3. Gayla Nuss

    Thank you for your pattern/instructions. This sounds like a great way to repurpose the t-shirts we’ve accumulated. I’m wondering about adding some type of non-slip grip to the back. (I also found this on Sew Can She)


  4. Michelle Woods

    Love the design and your writing is awesome! (the grass skirt – LOL!) Great design and pics! I’m putting this on my project list …


  5. This is the amazing bath mat. I appreciate for your beautiful renovation. It is a very informative blog to discuss the bathroom problem very efficiently. Your discussion not only perfect for a small bathroom but also for the whole house.

    Liked by 1 person

  6. Maria

    Love your instructions. I made a similar mat and used fabric that is intended for the soles of pajama feet for the bottom layer of the base. It is slip resistant. I purchased it from JoAnn.

    Liked by 1 person

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s